Laxmi En-fab Pvt. Ltd


Quick Contact

Mobile : +91-9725012749, +91-8980800839, +91-8980800840

Phone : +91-97-25012740

Fax : +91-97-40084330

Call Us : 08042782899

Online Air Classifier

Online Air Classifier

We are bracketed with the prestigious Manufacturers, Exporters and Suppliers of Online Air Classifier from Gujarat (India). The Online Air Classifiers that we make available are widely acknowledged for their features such as high efficiency, low maintenance, longer functional life and corrosion resistance. Talk of price; we are known for providing the best quality at rock bottom prices.

Details :

  • Air Classification is the process of separating particles according to the settling velocity in a gas. Air Classifiers are used to separate dry materials into different particle size fractions by their size, mass or shape. Air Classifiers are used to modify a particle size distribution, remove the fines fraction of a material or the over size or coarse particles of a material or create two grades of material.
  • Air Classifier is a compact and dust tight machine for fine classifying various powdered materials. The air classifiers are constructed with high engineering standards to give long reliable service. Air Classifiers are designed with low operating speed, for minimal wear and tear when handling abrasive materials. Easy access to the interior of the machine for inspection and cleaning is ensured by the provision of generously proportioned easy inspection doors. The rotor is mounted on heavy duty antifriction bearings which are located outside the machine and protect them against ingress of dust.
  • In event of air classification cycle of operation, material enters the centre feed pipe and drops upon the rotating distributor plate below, which disperses the material into the upward sweep of circulating air developed by the fan in the top chamber of the drum. The whizzer blades set up a centrifugal motion of the air and material. This concentrates the oversize material along the surface of the upper inner cone, where gravity causes it to flow into the lower inner cone and then out the tailings spout at the bottom. The air stream carrying the powdered material of required fineness moves through the fan and is delivered into the outer cone chamber where the fines are discharged as finished product which is desired to classify. After the fines are released in the outer cone, the air returns through the deflector ports to the inner cone, setting up a continuous cycle.
    • Feeding Hopper
    • Main classifier
    • Cyclone dust colletor
    • Blower and pipe line

Looking for Product Name ?